Characteristics:
● IGBT inverter technology
● Wide range of power&nb•✔₩sp;supply
● Good pro©↕♥duct consistency
● Pulse freque★≈ncy is adjustable
● With variety&n∏×bsp;of TIG operation↓±ε mode
● High frequency arc&nb ♥☆sp;ignition, welding penetration ↓♥well
● Performance stable, >∏♣strong anti-interference abi₹≤lity
● Thermal design ≠ ₽;is reasonable&nbs ♣p;to protect the machine ×perfectly
● Digital display for €♣;current to acc✘urate preset welding cur₽ε><rent before ₩↑✔≈welding
● With MMA function (≤σ™₽200A above $₩∏σ;model)
● Two TIG&♣₽nbsp;mode: DC TIG&n¶≥σbsp;or Pulse TIG
●DSP digital welding machine;
●RS-485 communication so✔✔cket match RC-6,RC-7 remote controller;
● The welding cables&♥φnbsp;can be lengthened&n§'↑bsp;to 50~100M/50m∑σ♣m2
|
Model |
WSM-400 |
|
Company type |
PNE61-400P |
|
Rated input voltage(V) |
3 phase 380V±15% 50~60Hz |
|
Rated Input capacity (KW) |
17 |
|
No-load voltage (V) |
76±5% |
|
Output current adjusting r✘±ange(A) |
5~410 |
|
Pulse frequency (Hz) |
0.1~500 |
|
Thrust current range(MM§ 'A) |
0~1500A/ms |
|
Slope up time (s) |
0.1~99.9 |
|
Slope down time (s) |
0.1~99.9 |
|
Spot time (s) |
0.01~9.99 |
|
Pre-flow time (s) |
0~13 |
|
Post-flow time (s) |
0.1~50 |
|
Pulse ratio range |
0.1%~99% |
|
Duty cycle (40℃) |
60% |
|
Power factor |
0.93 |
|
Efficiency |
85% |
|
Insulation grade |
F |
|
Case protection grade |
IP21S |
|
Cooling |
Wind |
|
Dimensions (mm) |
560×300×530 |
|
Net weight (kg) |
33 |
